Get the app Chrome extension Freelance ideasGigsSign inFind my gigs

ProfilePush / Freelance ideas / Electrical Engineer

Freelance Ideas for Electrical Engineers: 10 Gigs to Sell

Updated 2026-11-17 · 10 gig ideas · Prices are typical ranges for new freelancers, not promises
QUICK ANSWERAn electrical engineer can sell fixed-scope design and review work to small businesses that lack in-house engineers. The three strongest gigs are schematic and PCB design reviews for hardware startups, EV charger and electrification load calculations for contractors, and solar PV permit plan sets for installers. Start with reviews and drawings, then move into larger design and compliance packages.
See the gigs you could sell as an electrical engineer, from your resume

Upload your resume. In about 30 seconds you get 3 gig ideas with prices, written from your real experience. Post one with a tap.

Find my gigs, free

Who's buying electrical engineer work right now

Hardware startups, product designers and small manufacturers often have one engineer or none, so they buy outside help to review schematics, lay out boards and replace parts that have gone obsolete. Many prototype in KiCad or Altium and need someone to check their work before they pay for a board run or send a product to a test lab for CE, FCC or UL testing.

On the building side, electrification is driving steady work. Contractors and installers handle EV chargers, heat pumps, panel upgrades, solar and battery storage, and permit offices ask for load calculations, single-line diagrams and plan sets that follow the locally adopted NEC or IEC rules. Small firms would rather buy these documents per project than hire a full-time engineer. Note that stamped or sealed drawings usually require a licensed PE in that jurisdiction, so scope your gigs to match your license.

10 freelance gig ideas for electrical engineers

GIG 1Starter

I will review your electronics schematic and send a marked-up report

$150–$600 · about 3 days

Who buys: Hardware startup founders and makers preparing a first PCB run

They are about to order boards and fear a wiring or component mistake will waste weeks and money. A board respin costs far more than a review, so a second set of eyes is an easy purchase.

Schematic readingComponent datasheet checksPower and decoupling designClear written reports
Make this my gig ›
GIG 2Starter

I will redraw your hand sketches into clean electrical drawings

$100–$500 · about 4 days

Who buys: Small electrical contractors and facility managers with outdated or hand-drawn records

Their panel schedules, wiring diagrams or as-builts are messy, missing or not in CAD. Inspectors, clients and insurers ask for readable drawings, and contractors have no time to make them.

AutoCAD Electrical or similarElectrical symbols and standardsPanel schedulesAttention to detail
Make this my gig ›
GIG 3Starter

I will do NEC load calculations for EV chargers and panel upgrades

$75–$300 · about 2 days

Who buys: Residential electricians and EV charger installers

They need a load calculation to prove a service can handle a charger, heat pump or upgrade before the permit is approved. Home electrification work is common and permit offices increasingly ask for documented load calculations.

NEC Article 220 and 625Service and feeder sizingLoad management optionsSpreadsheet tools
Make this my gig ›
GIG 4Intermediate

I will find drop-in replacements for obsolete or out-of-stock parts

$150–$800 · about 5 days

Who buys: Small manufacturers and product companies with aging bills of materials

A key component is end-of-life or unavailable and production is blocked. Supply problems stop revenue, and finding a pin-compatible alternative needs engineering judgment.

BOM analysisDistributor and parametric searchDatasheet comparisonRisk notes for requalification
Make this my gig ›
GIG 5Intermediate

I will design your PCB layout in KiCad or Altium, ready to order

$300–$2,500 · about 10 days

Who buys: Startups and product designers with a finished schematic

They have a working circuit but no one to turn it into a manufacturable board. Many teams can draw a schematic but lack layout experience, and good layout prevents noise and assembly issues.

KiCad or AltiumDFM rulesSignal and power integrity basicsGerber and BOM output
Make this my gig ›
GIG 6Intermediate

I will create a solar PV and battery permit plan set

$150–$700 · about 3 days

Who buys: Small solar installers and battery storage contractors

Each job needs a single-line diagram, site plan and equipment specs before the permit is filed. Installers file many permits and prefer to pay per project instead of hiring a designer.

NEC Article 690 and 705Single-line diagramsString sizingDesign tools like AutoCAD or PV software
Make this my gig ›
GIG 7Intermediate

I will do a lighting design with photometric calculations

$250–$1,500 · about 7 days

Who buys: Architects, interior designers and commercial building owners

They need to show light levels meet code and comfort targets before buying fixtures. Energy codes and client expectations push teams to prove lighting levels with real calculations.

DIALux or AGi32Lighting standardsFixture selectionEnergy code basics
Make this my gig ›
GIG 8Advanced

I will prepare a CE or FCC pre-compliance review for your product

$400–$2,000 · about 7 days

Who buys: Hardware startups preparing for formal lab testing

They don't know which standards apply and worry about failing expensive EMC or safety tests. Failing at the test lab means delays and repeat fees, so founders pay for preparation.

EMC design practicesApplicable standards mappingDesign reviewTest plan writing
Make this my gig ›
GIG 9Advanced

I will design a control panel with wiring diagrams and BOM

$600–$3,500 · about 14 days

Who buys: Small machine builders and industrial automation shops

They need a documented control panel design that a panel shop can build and an inspector can approve. Machine builders get custom orders and need fast, documented panel designs without adding staff.

UL 508A or IEC 60204-1 basicsPLC I/O planningEPLAN or AutoCAD ElectricalComponent selection
Make this my gig ›
GIG 10Advanced

I will run a short-circuit and arc flash study for your facility

$1,500–$6,000 · about 21 days

Who buys: Small manufacturing plants and commercial facility managers

They need arc flash labels and safety data but have no current study. Safety rules like NFPA 70E push facilities to keep studies and labels up to date.

ETAP or SKM PowerToolsProtective device coordinationNFPA 70E or IEEE 1584Field data collectionPE license where required
Make this my gig ›

How to land your first client as an electrical engineer

  1. Pick one buyer type to start, such as hardware startups or solar installers, and choose two gigs that fit them.
  2. Build three sample deliverables from past or invented projects, like a marked-up schematic review or a sample load calculation, and remove any client confidential data.
  3. Write one clear gig page per offer with scope, what you need from the buyer, what they get and the delivery time; ProfilePush can read your resume and draft gig ideas and a gig page you can post.
  4. Contact ten local electricians, installers or startups you know with a short message offering a fixed-price first job at a fair rate.
  5. Post your gigs on one or two marketplaces and answer every inquiry within a day with a short, specific reply.
  6. After the first job, ask for a review and a referral, and turn the work into a case study you can show the next buyer.

What to charge

Price each gig as a fixed package tied to a clear deliverable, not an hourly rate. Estimate your hours, multiply by a modest hourly figure, then add a buffer for revisions and questions. Raise prices once you have reviews and repeat buyers.

Where to find clients

UpworkSend short proposals that restate the buyer's problem and point to one matching sample.
FiverrList tightly scoped packages like load calculations or schematic reviews with clear tiers.
LinkedInPost short breakdowns of design mistakes you have caught and message founders of small hardware companies.
Local electrical contractor and solar installer networksIntroduce yourself at supply houses, trade association events and local installer groups with a one-page offer.
Hardware communities like Reddit r/PrintedCircuitBoard and EEVblog forumsGive useful free feedback publicly and let people contact you for paid, in-depth reviews.
Hackaday.io and Kickstarter hardware projectsReach out to early product creators who will need layout, BOM or compliance help before manufacturing.

Mistakes to avoid

See the gigs you could sell as an electrical engineer, from your resume

Upload your resume. In about 30 seconds you get 3 gig ideas with prices, written from your real experience. Post one with a tap.

Find my gigs, free

Questions

Can an electrical engineer freelance without a PE license?

Yes. Many gigs like schematic reviews, PCB layout, part replacement and drafting do not need a stamp. Work that must be sealed for permits or public safety usually requires a licensed PE in that jurisdiction.

What is the easiest electrical engineering gig to start with?

Schematic reviews and load calculations are good first gigs. They are small, quick to deliver and easy for buyers to understand.

How much should a new freelance electrical engineer charge?

Small gigs like load calculations often start around 75 to 300 USD, while PCB layout and studies run into the thousands. Price per package and raise rates as you collect reviews.

Do I need professional liability insurance?

It is wise for any design work that could affect safety or cost a client money. Check local requirements and talk to an insurance broker before taking on larger projects.

What software do freelance electrical engineers need?

It depends on the gig. KiCad is free for PCB work, while building work often uses AutoCAD Electrical, and studies use tools like ETAP or SKM, which can be costly.

Can I freelance part-time while keeping my job?

Many engineers do, using small fixed-scope gigs that fit evenings and weekends. Check your employment contract for conflict of interest and side work rules first.

Freelance ideas for other roles

Embedded Systems Engineer10 gig ideasMechanical Engineer10 gig ideasCAD Designer10 gig ideasCivil Engineer10 gig ideasSoftware Engineer10 gig ideasData Engineer10 gig ideasData Analyst10 gig ideasData Scientist10 gig ideas

All roles ›

Your gigs, from your resumeFind my gigs
H1B sponsor jobs, matched to you.

Every job on ProfilePush is from an employer that filed H1Bs in 2025. Free to start.

Match sponsor jobs